Using The Alarm Clock; Setting The Current Time; Setting The Alarm Clock - Uniden UBC360CLT Owner's Manual

Your scanner's Clock displays whenever you turn off the radio functions.
It can also be used as a standard alarm clock.

Setting the Current Time

Follow the steps to set the current time:
1. Move the slide switch to Clock Set.
The hour digits flash.
. Press ▲ or ▼ to change the hour by one
hour increments/decrements or press the
number keys to select the present hour.
Then press E/PGM to set the hour. The
minutes digits flash.
3. Press ▲ or ▼ to change the minute setting by one minute or press the
appropriate number keys to enter the minutes. Then, move TIME slide
switch to Clock position.
Note: When minute is changed, second is reset to 0.

Setting the Alarm Clock

Follow these steps to set the alarm time:
1. Move the slide switch to Alarm Set.
The hours digits flash.
. Press ▲ or ▼ to change the hour by one
hour increments/decrements or press the
number keys to select the present hour.
Then press E/PGM to set the hour. The
minutes digits flash.
3. Press ▲ or ▼ to change the minute setting by one minute or press the
appropriate number keys to enter the minutes. Press E/PGM to set the
minutes.
. To lock in the alarm time, move the slide switch to Clock.
16
UB355ZH(UBC360CLT).indd 16

Using the Alarm Clock

Using the Alarm Clock
2008/04/08 15:56:01