Emergency Alarm Function; Change Between Main Channel And Fm Radio; Fm Radio Station Scanning - Alinco DJ-A40 Instruction Manual

BASIC OPERATIONS

Emergency Alarm Function

Change between Main Channel and FM Radio

Press 【 A 】 key and then press 【 1 】 key to switch between Main Channel and FM broadcasting
receiver. When switching to FM radio, the radio will automatically start receiving both FM radio
frequency and Main Channel. An arrow directs the current operational channel.
NOTE: While receiving FM radio, only the following functions are supported: Channel editing, channel
deletion, keypad lock and beeping on/off. Other functions are available only for main channel.

FM radio station scanning

While listening to the FM broadcasting, press 【 B 】 key or 【 C 】 key to start scanning. When a signal is
received, LCD displays current frequency and stops scanning.
Repeat the key operation to exit the FM radio station receiving.
22
Professional
FM Transceiver
While Stand-by state, press this key for 3 seconds to enable the emergency
alarm function. When activated the function, the radio will sound an alarm beep
and start transmitting the alarm beep. The alarming lasts 1 minute, then the
radio will return to Stand-by, or you may press this key again to stop alarming.