Lumbar Adjustment; Reclining Seatbacks - GMC 2011 Yukon XL Denali Owner's Manual

(Easy Exit Positions): Press to
recall the easy exit positions. The
vehicle must be in P (Park).
If the easy exit feature is
programmed on in the vehicle
personalization menu, automatic
driver seat and power steering
column movement occur when the
ignition key is removed.
A single beep sounds. The driver
seat moves back approximately
8 cm (3 in) and the power steering
column moves up and forward. To
move the seat back farther, press
the easy exit button again until the
seat is all the way back.
If something has blocked the driver
seat while recalling the exit position,
the recall may stop. Remove the
obstruction; then press and hold the
power seat control rearward for
two seconds. Try recalling the exit
position again. If the exit position is
still not recalling, see your dealer for
service.
See Easy Exit Recall and Easy
Exit Setup under Vehicle
Personalization on page 5 44 for
more information.

Lumbar Adjustment

To adjust the lumbar support:
Press and hold the front or rear
of the control to increase or
decrease lumbar support.
Press and hold the top or bottom
of the control to raise or lower
the height of the lumbar support.
Seats and Restraints

Reclining Seatbacks

Power Reclining Seatbacks
WARNING
You can lose control of the
vehicle if you try to adjust the
seat while the vehicle is moving.
The sudden movement could
startle and confuse you, or make
you push a pedal when you do
not want to. Adjust the driver seat
only when the vehicle is not
moving.
3-5