Installation Setup; Setting The Parking Assist Interrupt On/Off; Setting The Climate Interrupt On/Off; Setting The External Audio Processor On/Off - Alpine X800D Owner's Manual

Installation Setup

[Installation] is selected on the General setup menu in step 3. See
"General Setup Operation" (page 46).
Setting item: Installation
The Installation check screen is displayed.
Setting the Parking Assist Interrupt
On/Off
[Parking Assist Interrupt] is selected on the General setup menu in
step 3. See "General Setup Operation" (page 46).
When you turn this setting to On, the Parking Assist screen will be
tuned in if the obstacle within a certain distance is detected by the front
or rear sensor of your vehicle.
Setting item: Parking Assist Interrupt
Setting contents: Off / On (Initial setting)
• For details, please refer to "Parking Assist Interrupt Function*"
(page 29).

Setting the Climate Interrupt On/Off

[Climate Interrupt] is selected on the General setup menu in step 3.
See "General Setup Operation" (page 46).
When you turn this setting to On, the Climate screen will be tuned in if
you adjust the air condition in your vehicle. The icons of adjusted items
will become high light.
Setting item: Climate Interrupt
Setting contents: Off (Initial setting) / On
Setting the External Audio Processor
On/Off
[External AP] is selected on the General setup menu in step 3. Refer to
"General Setup Operation" (page 46).
When a compatible external audio processor is connected, please set
this item to "On".
Setting item: External AP
Setting contents: Off (Initial setting) / On
Off: The connected audio processor is not
recognised by X800D.
On: The connected audio processor is recognised
by X800D.
• Some items of Sound Setup cannot be adjusted from this unit when
External AP is set to On.
• Press and hold AUDIO button is invalid when External AP is set
to On .

Setting the Digital Output

[Optical] is selected on the General setup menu in step 3. Refer to
"General Setup Operation" (page 46).
To connect an audio processor using optical digital output, set to "On"
by the following procedure.
Setting item: Optical
Setting contents: Off (Initial setting) / On
• This setting is available only when External AP is set to On. Refer to
"Setting the External Audio Processor On/Off" (page 51).
• If Optical is set to On, the Optical (
+ –
• , and buttons are invalid when Optical is set to On.
) indicator appears.
51
-EN