Table of Contents
Advertisement
4
Touch the size of the front speaker.
5
Select whether or not there is a tweeter.
6
Select the installation position of the rear speaker.
If you select "No rear speaker", you cannot adjust the rear
speaker in Time Correction/X-OVER in sound setup.
7
Select whether or not there is a subwoofer.
If you select "No", you cannot adjust the subwoofer level/
subwoofer phase in sound setup.
8
Select the material of the car seats.
The settings confirmation screen is displayed.
• If the car seats are made of both leather and fabric, select
[Half leather].
9
Check the settings and touch [OK].
• If Preset3 was already saved for Time Correction/X-OVER/
Parametric EQ, the data will be overwritten.
• The Easy sound settings are reflected in the following Sound Setup
items.
Setting the MX (Media Xpander)
- Adjusting the Parametric Equalizer Curve (Parametric EQ)
Adjusting the Time Correction (Time Correction)
Adjusting the Crossover Settings (X-OVER) (only when
Subwoofer is set to [On])
The Equalizer Presets settings are disabled.
Downloaded Sound Settings
Using a USB memory device, the sound settings downloaded from the
ALPINE website can be used to configure Time Correction, X-OVER
and Parametric EQ settings.
Setting item: Downloaded Sound Settings
The file name of download data shall be
"A_U*****.MP3".
• Save the setting data in the root folder.
• For details about procedures of download, see ALPINE's web site.
24
-EN
Extender (fixed)
Identifier (alphabet or number
5 letters maximum)
Header (fixed)
1
Touch [Downloaded Sound Settings].
Setting data files are displayed in a list with a maximum of 5
items.
2
Touch the desired file.
3
Touch [OK].
The downloaded setting values are set as the Time
Correction/X-OVER/Parametric EQ settings, and at the
same time saved as Preset3, respectively.
• When no downloaded file is detected in the connected USB memory,
the "Downloaded Sound Settings" function is not available.
• If Preset3 was already saved for Time Correction/X-OVER/
Parametric EQ, the data will be overwritten.
Easy Setup
This unit provides the custom settings for your vehicle. You can select it
to be easily fit your audio settings.
1
Touch [EASY SETUP].
The EASY SETUP screen is displayed.
2
Touch [Mercedes M-Class,W164].
Easy Sound Setup mode/BASS ENGINE
SQ mode
During normal source play mode, you can activate Easy Sound Setup
mode by pressing and holding
Balance/Bass level/Treble level/Subwoofer level and BASS ENGINE
SQ can be adjusted in this mode.
Easy Sound Setup mode
Adjust the Fader/Balance/Bass level/Treble level.
Display example for Easy Sound Setup screen
• You can choose to display this menu on the left or right of the screen.
For details, refer to "Setting the Easy Sound Setup Position" on
page 58.
• Subwoofer level is not adjustable when SubW. is Off. (Page 52)
• The Fader/Balance setting is reflected to "Setting the Balance/
Fader" (page 52).
• In BASS ENGINE SQ mode, touch [BASS ENGINE SQ] to switch to
Easy Sound Setup screen.
AUDIO for at least 3 seconds. Fader/
Advertisement
Table of Contents
