3. Install the drive into the bay. Align the screw holes, and insert the two screws.
4. If the drive that you installed is a removable-media drive, place the bezel frame
that comes with your computer over the drive bay.
5. Connect the power and signal cables to the drive.
What to do next
v To work with another option, go to the appropriate section.
v To complete the installation, go to "Replacing the cover and connecting the
cables" on page 29.
Installing internal drives in bays 4, 5, 6, and 7
To install an internal drive in bay 4, 5, 6, or 7:
1. Remove the cover (see "Removing the cover" on page 15).
Note: If your computer has a CD drive or DVD drive, you might need to
remove the signal and power cables from the drive.
Chapter 3. Installing internal options
25