Table of Contents
Advertisement
Installing internal drives in bays 1, 2, and 3
24
User Guide
To install an internal drive in bay 1, 2, or 3:
1. Remove the cover (see "Removing the cover" on page 15).
Note: If your computer has a CD drive or DVD drive, you might need to
remove the signal and power cables from the drive.
2. Remove the bay panel, and insert a flat-blade screwdriver into one of the slots
on the static shield in the drive bay into which you are installing the drive.
Gently pry the static shield loose from the drive bay.
Advertisement
Table of Contents
