Photo Mode Settings - GoPro Hero 3+ Quick Manual

17
Resolution & Field of View
●
-
Press POWER
→
Select : 12MP WIDE: 12Mp photos (4000x3000. 4:3) with the wider field of view.
- To exit press POWER
The Field of view setting works like in the Video Mode (see card 14), but in the Photo Mode it is linked to
the Resolution as shown above. You will normally shoot in the Wide position but if you want a closer
Shot Frequency
●
You can change this setting so when you press the SHUTTER
photo the camera can take 3, 5 or 10 photos per second while you hold down the button.
-
Press POWER until you see the Settings Screen
→
- To exit press POWER

Photo Mode Settings

until you see the Settings Screen
7MP WIDE: 7Mp photos (3000x2250. 4:3) with the wider field of view.
7MP MEDIUM: 7Mp photos (300x2250. 4:3) with a narrower field of view.
5MP MEDIUM: 5Mp photos (2560x1920. 4:3) with a narrower field of view
until you get to EXIT.
frame you can switch to Medium.
Select: SINGLE / 3
SPS
until you get to EXIT.
, enter with SHUTTER
button instead of taking a single
, enter with SHUTTER
In Single you shoot pressing the SHUTTER
button once. In the other positions you
must press and hold SHUTTER to take that
/ 5 / 10
SPS SPS
number of photos per second. If you want
the photos to be taken without having to
hold the button see Burst Photo Mode
button and go to:
button and go to:
(card 11).