Photo Mode - GoPro ROCKY POINT User Manual

/ Photo Mode

PHOTO CAPTURE MODE
When you connect your camera to the GoPro App or remote, you can
access one capture mode in Photo mode: Single photo.
CAPTURING A SINGLE PHOTO
1. Select Single photo mode [
2. Short press the Shutter/Select button [
two times, the camera status lights flash and the counter on the
camera status screen increases by one.
Note: When your camera is connected to the GoPro App or the remote, it remains on in standby mode
after capturing video or photos.
44
] on the GoPro App or the remote.
]. The camera beeps
PHOTO SETTINGS
You can change the photo settings by connecting HERO4 Session to
the GoPro App or the remote.
MEGAPIXELS
HERO4 Session captures photos at 8MP and 5MP.
8MP Ultra Wide
Largest field of view. Good for action shots.
(default)
5MP Medium Mid-range field of view.
Note: Changes that you make to Megapixels in Photo settings apply only to photo capture. To adjust
this setting for multi-shot capture, adjust Spot Meter in Multi-Shot settings.
/ Photo Mode
45