GoPro Hero 3+ Quick Manual page 10

7
Connecting Wi-Fi Remote to several cameras
You can connect the remote with up to 50 cameras to operate them all simultaneously with a button.
1 - Turn On all cameras to be connected
2 - In every camera press Wi-Fi button twice to enter Wi-Fi menu directly, press SHUTTER
2 - In the remote press and hold SHUTTER
Searching Mode.
3 - Once finished, the remote remains in Searching Mode. To stop it press SHUTTER
4 - Like with a single camera (see previous card) the remote can simultaneously:
- Turn On/Off all cameras (POWER
- Activate Recording in all cameras (SHUTTER
- Change operation mode in all cameras (POWER
NOTE: the remote can not access the cameras menus and change settings. This must be done in
every camera individually.
Follow this steps:
→
Select WIFI RC
All cameras start searching the closest remote.
In a few seconds all cameras will connect to the remote
Select NEW
and at the same time press POWER
button)
. The remote enters
button.
button)
button)
and: