Language Selection; Changing The Current Date And Time - Liebert 130 kVA User Manual

User Manual
Hipulse - Single Phase '1+N' UPS System

5.12 Language Selection :

If required, select the appropriate language using the following procedure.
MEASUREMENT MEASUREMENT
>FUNCTION >FUNCTION
MAINTENANCE MAINTENANCE
SETUP SETUP
WRITE WRITE SAVE SAVE
MOVE MOVE EXIT ESC EXIT ESC
ENTER PASSWORD ENTER PASSWORD
00000000 00000000
BATTERY TEST BATTERY TEST
GENERATOR GENERATOR
>PANEL SETUP >PANEL SETUP
NEXT PAGE NEXT PAGE
>LANGUAGE >LANGUAGE ENG ENG
TYPE 0000 TYPE 0000 MASTER MASTER
GROUP 1 GROUP 1 UPS 1 UPS 1
PASSWORD 00000000 PASSWORD 00000000
Use the UP push button to rotate through the available options and select the required
default language. The options are: English, Italian, German, French , Dutch &
Spanish.
Press ENTER to accept and store the language selection, then step back to the
default window by repeatedly pressing ESC as required; the current alarms should
now be stored in the selected language.
Note: Ensure the data entered during the following procedures are r3cordded in the appropriate
commissioning documentation.

5.13 Changing the current Date and Time

1. From DEFAULT WINDOW, pressing ENTER key, select MAINTENANCE >>
ENTER>> PASSWORD>> ENTER>> select and enter the line showing the time and
date.
2. Position the cursor on the row on which the date-time is displayed, and press
ENTER.
3. Using the 'UP' and 'DOWN' menu buttons, enter the current time and date
information.
4. Press ENTER to save the settings, then press ESC twice to return to the DEFAULT
WINDOW.
From 'Default' window, press ENTER key.
< <
Select the FUNCTION and press the enter key.
A password must be entered to gain a further
access to next menu. The initial default password
of '00000000' need not be changed at this point of
time. Press the enter key.
Select PANEL SET UP and press enter key.
< <
< < Select LANGUAGE and press the ENTER key.
45
130 kVA - 110V