Ford 2013 Explorer Owenrs Manual page 346

346
Front parking lamp/turn signal and sidemarker bulbs
Replacing front parking lamp/turn signal bulbs
Reverse steps to reinstall bulb(s).
Replacing sidemarker bulbs
Reverse steps to reinstall bulb(s).
2013 Explorer (exp)
Owners Guide gf, 1st Printing
USA (fus)
Maintenance
1. Make sure that the headlamp control is
in the off position.
2. Open the hood.
3. Remove the hood overslam bumper
tower to service park/turn or sidemarker
bulbs (if needed).
1. Rotate the bulb socket
counterclockwise and remove it from
the lamp assembly.
2. Pull the bulb straight out of the
socket.
1. Rotate the bulb socket
counterclockwise and remove it from
the lamp assembly.
2. Pull the bulb straight out of the
socket.