Settings - Skoda Bolero Owner's Manual

Infotainment systems
Hide thumbs Also See for Bolero:
Table of Contents

Advertisement

No route guidance is carried out
Red - All traffic obstructions
Route guidance takes place
Gray - The traffic obstruction is not on the route
Red - The traffic obstruction is on the route, the route will not be recalcula-
ted the route and the route passes through the traffic obstruction
Orange - The traffic obstruction is on the route, the route is recalculated and
an alternative route is available
Dynamic route
The device allows an evaluation of the traffic reports during the route guid-
ance.
If, in the traffic report, the traffic obstruction is present on the route, the dy-
namic route function is on and the traffic delay is evaluated as of high impor-
tance, then the route is recalculated and an alternative route is offered.
The device indicates the recalculation of the route with the message Calculat-
ing the route....
If, in the traffic report, the traffic obstruction is present on the route and the
dynamic route function is not switched on, then no recalculation of the route
takes place and the route is guided through the traffic obstruction.
Turn on/off dynamic route
Press in the Navigation menu the function key  → Route options → Dy-
namic route.
Switch on/off the option for the dynamic route.
Note
There may not be any advantage in avoiding the traffic jam if the diversion is
also heavily congested.
Enter/remove route traffic obstruction manually
If a traffic obstruction is detected during route guidance (e.g. traffic jam), this
traffic obstruction be manually entered into the route.
After entering, the unit calculates and provides an alternative route.
Enter traffic obstruction
Press in the Navigation menu the function key  → Congestion ahead.
Set the length value of the traffic obstruction by touching the scale and us-
ing the function keys /  or turning the knob  .
62
Navigation
The traffic obstruction is shown in red in the map to the right along the route
according to the value set.
Remove traffic obstruction
The traffic obstruction is removed from the route after completion of the route
guidance or can manually be removed as follows.
Press in the Navigation menu the function key  → Cancel "congest. ahead".

Settings

Introduction
This chapter contains information on the following subjects:
Route options
Map
Fuel options
Navigation announcements
Advanced settings
Manage memory
Route options
Press in the Navigation menu the function key  → Route options.
Suggest 3 alternative routes - Switch on/off the menu for alternative routes
(economical, fast, short)
Route: - Setting the preferred route
Economical - Most economic
Fast - Fastest
Short - Shortest
Dynamic route - Switch on/off dynamic route recalculation due to TMC traffic
reports
Most frequent routes - Turn on / off the display in the split screen selection
of the most frequent routes
 Avoid motorways - Switch on/off the non-use of motorways in the route
calculation
 Avoid ferries and motorail trains - Switch on/off the non-use of ferries
and motorail trains in the route calculation
 Avoid toll roads - Switch on/off use of toll roads for the route calculation
 Avoid tunnels - Switch on/off use of tunnels for the route calculation
62
63
63
63
63
63

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Amundsen

Table of Contents