Ford 2015 C-MAX HYBRID Owner's Manual page 254

Preparation: Park the vehicle in a safe, level
and secure area, away from moving traffic.
Switch the hazard lights on. Apply the
parking brake and switch the engine off.
Inspect the flat tire for visible damage.
Sealant compound contains latex. Use
appropriate precautions to avoid any
allergic reactions.
Do not remove any foreign object that has
pierced the tire. If a puncture is located in
the tire sidewall, stop and call roadside
assistance.
1. Remove the valve cap from the tire
valve.
2. Unwrap the dual purpose hose (black
tube) from the back of the compressor
housing.
3. Fasten the hose to the tire valve by
turning the connector clockwise.
Tighten the connection securely.
C-MAX (CCG) Canada/United States of America, enUSA, Second Printing
Wheels and Tires
4. Plug the power cable into the 12-volt
5. Remove the warning sticker found on
6. Start the vehicle and leave the engine
E175981
7.
8. Inflate the tire to the pressure listed on
251
power point in the vehicle.
the canister and place it on the top of
the instrument panel or the center of
the dash.
running so the compressor does not
drain the vehicle's battery.
Turn dial (A) clockwise to the sealant
position. Switch the kit on by pressing
the on/off button (B).
the tire label located on the driver door
or the door jamb area. The initial air
pressure gauge reading may indicate
a value higher than the label pressure
while you pump the sealing compound
into the tire. This is normal and should
be no reason for concern. The pressure