Table of Contents
Advertisement
E144625
3. Using the yellow cap tool, press the tab
located on the kit compressor housing
while pulling up on the sealant canister.
Installation of the Sealant Canister to
the Kit
E144626
1.
Align the sealant canister with the kit
housing.
E161567
C-MAX (CCG) Canada/United States of America, enUSA, Second Printing
Wheels and Tires
2. Once aligned, seat the sealant canister
E144628
3. Wrap the clear tube around the
Note: If you experience any difficulties with
the removal or installation of the sealant
canister, consult your Ford Motor Company
authorized dealer for assistance.
E144629
Be sure to check the sealant compound's
use by date regularly. The use by date is
on the lower right hand corner of the label
located on the sealant canister (bottle).
You should replace the sealant canister
after four years.
(Type 2)
Note: The temporary mobility kit contains
enough sealant compound in the canister
for one tire repair only. See an authorized
Ford dealer for replacement sealant
canisters.
248
by lightly pushing down until you hear
an audible click.
compressor housing.
Advertisement
Table of Contents
Troubleshooting
