Table of Contents
Advertisement
Refresh Rate Selection
There is no need to choose the highest possible refresh rate on an LC display. It is not technically
possible for an LC display to flicker. Even at a refresh rate of 60 Hz you will get an absolutely
flicker-free image. More important is that you make sure that you use one of the factory modes. In
contrast to a modern CRT monitor, which is a multiscan monitor, the LC display is a multi-
frequency monitor. This means, the best results are only obtained by using the factory modes. You
will find a table with the factory modes in this user's guide. These modes, for example, are 60, 70
and 75 Hertz, but not 72Hz, for the native resolution of 1280x1024. In Windows 95/ 98/2 000/ XP
you can change the refresh rate as follows:
1. Double click the "Display" icon in the Control Panel.
38
Refresh Rate Selection
Advertisement
Table of Contents
