Garmin GNS 430 Pilot's Manual And Reference page 68

SECTION 5
FLIGHT PLANS
4) A blank Flight Plan Page appears for the first
empty storage location (Figure 5-3). Use
the small and large right knobs to enter the
identifier of the departure waypoint and press
the ENT Key.
Figure 5-3 Flight Plan Page
5) Repeat step 4 above to enter the identifier for
each additional flight plan waypoint.
6) Once all waypoints have been entered, press
the small right knob to return to the Flight
Plan Catalog Page.
Flight Plan Editing
To add a waypoint to an existing flight
plan:
1) Press the FPL Key and turn the small right
knob to display the Flight Plan Catalog Page.
Press the small right knob to activate the
2)
cursor.
3) Turn the large right knob to highlight the
desired flight plan and press the ENT Key.
Turn the large right knob to select the point to
4)
add the new waypoint. If an existing waypoint
is highlighted, the new waypoint is placed
directly in front of this waypoint (Figure 5-4).
5-2
5)
6)
GNS 430 Pilot's Guide and Reference
Figure 5-4 Flight Plan Page
Use the small and large right knobs to enter
the identifier of the new waypoint and press
the ENT Key (Figure 5-5).
Figure 5-5 Waypoint Identifier Field Selected
Once all changes have been made, press the
small right knob to return to the Flight Plan
Catalog Page (Figure 5-6).
Figure 5-6 Edited Flight Plan Page