Garmin GNS 430 Pilot's Manual And Reference page 169

4) The flashing cursor moves to the type field
under the new message (Figure 10-27). Turn
the small right knob to display a window of
available options, (Figure 10-28): Event, One
Time, Periodic. Press the ENT Key to select.
Figure 10-27 Type Field Highlighted
Figure 10-28 Type Window
5) The flashing cursor moves to the time/date
field. Use the small and large right knobs
to set the time or date required before the
message is displayed. Time is entered as
hours/minutes/seconds (hhh:mm:ss). Event-
based messages expire at a specific date and
time. Press the ENT Key when finished.
To edit a scheduled message:
1)
2)
3)
4)
To delete a scheduled message:
1)
2)
3)
GNS 430 Pilot's Guide and Reference
Select 'Scheduler' from the Flight Planning Page,
using the steps described at the beginning of
this section.
The flashing cursor highlights the first message
field.
To edit the message text, turn the large right
knob to highlight the desired message field.
Use the small and large right knobs to edit the
message text—entering the new text directly
over the old message. Press the ENT Key when
finished.
To edit the time field, turn the large right
knob to highlight the field. Use the small and
large right knobs to edit the new date or
time—entering the new value directly over the
old figure. Press the ENT Key when finished.
Select 'Scheduler' from the Flight Planning Page,
using the steps described in this section.
The flashing cursor highlights the first message
field. Turn the large right knob to highlight
the desired message field.
Press the CLR Key to delete the message
text, followed by the ENT Key to confirm the
deletion.
SECTION 10
AUX PAGES
10-11