Dvd Playback; Playback; To Resume Playback After Stopping (Resume Play); Dvd Mode Operation Indicators - Sharp XL-E75H Operation Manual

DVD playback

/
ON / ON /
STAND-BY STAND-BY
TOP MENU TOP MENU
SUB TITLE SUB TITLE
/ DIGEST / DIGEST

Playback

1 Press the ON/STAND-BY button to turn the power on.
2 When the input is not set to the disc
mode, press the FUNCTION button
repeatedly to display the startup
screen.
The startup screen appears.
3 Press the ( ) button to open the disc tray.
4 Place the disc on the disc tray, label side up.
Be sure to place 8 cm (3") discs in the middle of the disc position.
5 Press the ( ) button to close the disc tray.
Discs supporting auto start will start to play once you close the
disc tray even if you do not press the
6 If playback does not start in step 5, press the
Note:
During operate FM/AUX, OPEN/CLOSE CD tray will change to DVD
function.
To interrupt playback:
Press the / ( / ) button.
To resume playback from the same point, press the
button.
To stop playback
DVD:
Press the ( ) button twice.
ON / ON /
STAND-BY STAND-BY OPEN / CLOSE OPEN / CLOSE
1 2 3
4 5 6
7 8 9
DIRECT DIRECT
0 10 10
TUNING TUNING TUNING TUNING
PRESET PRESET PRESET PRESET
SETUP SETUP OSD OSD FUNCTION FUNCTION
EQUALIZER EQUALIZER VOLUME VOLUME X-BASS X-BASS
MEMORY MEMORY MUTE MUTE
MENU/PBC MENU/PBC
ENTER ENTER
RETURN RETURN
AUDIO AUDIO ZOOM ZOOM ANGLE ANGLE
RANDOM RANDOM
SLOW SLOW STEP STEP
RDS RDS
ASPM / PTY ASPM / PTY DISP DISP A-B A-B
/ ( / ) button.
/ ( / ) button.
/
Audio CD/MP3/JPEG
Press the ( ) button.
When the unit is left unoperated for more than 5 minutes after
pressing the ( ) button, a screen saver appears (see page 8 when
the screen saver setting is "ON").
Press any button on the main unit or remote control. The startup
screen returns.
Caution:
Close the disc tray when not in use. Otherwise, dust may
accumulate inside and cause malfunction.
The unit gets slightly warm when used for a long time. It does not
mean the unit is damaged.
When attempting to play discs with scratches or of a different
region number, or unplayable or restricted (*1) discs, an error
message will appear on the TV display and the disc will not play.
(*1) Viewing is prohibited on some DVDs according to the audience
age.
Notes:
During disc initialisation, the volume cannot be adjusted.
Stop positions may be recorded on some discs. When you play
such a disc, playback stops there.
During an operation, "
operation is disabled by the disc.
The main unit detects loaded discs automatically and then the
indicators light up.
To resume playback after stopping
(resume play)
You can resume playback from the point playback is stopped.
1 Whilst a disc is playing, press the
The system stores the point you stopped.
2 To restart play, press the
Play resumes from the point you stopped.
To cancel the resume playback:
Press the ( ) button twice.
Notes:
The resume playback feature is disabled on some discs.
Depending on the disc, playback may resume from slightly
before the stopped position.

DVD mode operation indicators

The following are examples of operation indicators that appear
during DVD playback.
Operation
When the power
is on without a
disc.
Disc data is being
read.
( / )
Stop
Play
Pause
E-13
" may appear indicating that the
( ) button.
/ ( / ) button.
TV screen Unit display
TITLE TRK PRESET CHP PROG
NO DISC
TITLE TRK PRESET CHP PROG
LOADING
SLEEP REPEAT 1 A - B
KHz
MHz
SLEEP REPEAT 1 A - B
KHz
MHz