Table of Contents
Advertisement
10.
Remove the Drivers and Diagnostics Disk from the floppy drive, remove
the Windows CD from the CD drive (if you have inserted it), and then
click on "Yes."
Restart your system to enable your PC when you are finished setting up
your new hardware.
Proceed to "Verify Installation."
Verify Installation
1.
Double-click on "My Computer" on the desktop, double-click on
"Control Panel," and then double-click on "System."
2.
Click on "Device Manager."
Model SB104 10 Mbps Network Starter Kit Installation Guide
Advertisement
Table of Contents
