Kenwood DDX7015BT Instruction Manual page 76

REFERENCES REFERENCES
Videos cannot be played.
• Connect with USB Audio and Video cable
KCA-iP202 for iPod/iPhone except for iPod nano
(7th Generation)/iPod touch (5th Generation)/
iPhone 5S/iPhone 5C/iPhone 5 or KCA-HD100 and
KCA-iP103 through a Lightning-Digital AV adapter
for iPod nano (7th Generation)/iPod touch (5th
Generation)/iPhone 5S/iPhone 5C/iPhone 5. Other
cables cannot be used.
No sound of videos comes out.
• Connect with USB Audio and Video cable
KCA-iP202 for iPod/iPhone except for iPod nano
(7th Generation)/iPod touch (5th Generation)/
iPhone 5S/iPhone 5C/iPhone 5 or KCA-HD100 and
KCA-iP103 through a Lightning-Digital AV adapter
for iPod nano (7th Generation)/iPod touch (5th
Generation)/iPhone 5S/iPhone 5C/iPhone 5. Other
cables cannot be used.
Tuner
AME automatic presetting does not work.
• Store stations manually. (Page 28 )
Static noise while listening to the radio.
• Connect the antenna firmly.
Digital Radio (DAB) (only for
DDX5015DAB)
Cannot receive an ensemble.
• Your area is not covered by the ensemble.
The DAB antenna is not properly extended or
positioned.
• Adjust the antenna and try the ensemble scanning
again.
• Connect an active antenna (not supplied).
76
AV-IN1/AV-IN2
No picture appears on the screen.
• Turn on the video component if it is not on.
• Connect the video component correctly.
Pandora*/AUPEO!
The application does not work.
• The application on your iPod touch/iPhone/
Android is not the latest version. Update the
application.
* Only for DDX7015BT Region4/DDX5015DAB/DDX5015BT/
DDX715WBT Region 4.
Bluetooth
Phone sound quality is poor.
• Reduce the distance between the unit and the
Bluetooth mobile phone.
• Move the car to a place where you can get a better
signal reception.
The sound is interrupted or skipped while using a
Bluetooth audio player.
• Reduce the distance between the unit and the
Bluetooth audio player.
• Disconnect the device connected for Bluetooth
phone.
• Turn off, then turn on the unit.
(When the sound is not yet restored) connect the
player again.
The connected audio player cannot be
controlled.
• Check whether the connected audio player
supports AVRCP (Audio Video Remote Control
Profile).
The Bluetooth device does not detect the unit.
• Search from the Bluetooth device again.
The unit does not pair with the Bluetooth device.
• For devices compatible with Bluetooth 2.1:
Register the device using a PIN code. (Page 40)
• For devices compatible with Bluetooth 2.0:
Enter the same PIN code for both the unit and
target device. If the PIN code of the device is not
indicated in its instructions, try "0000" or "1234."
• Turn off, then turn on the Bluetooth device.
Echo or noise occurs.
• Adjust the microphone unit position.
• Adjust the echo volume or noise reduction
volume. (Page 42)
The unit does not respond when you try to copy
the phone book to the unit.
• You may have tried to copy the same entries (as
stored) to the unit.