Kenwood DDX7015BT Instruction Manual page 60

REMOTE CONTROLLER REMOTE CONTROLLER
Using the steering remote
controller
You can assign functions to the keys of the remote
controller on the steering wheel.
• This function is available only when your vehicle
is equipped with the electrical steering remote
controller.
• You can only register/change the functions while
you are parked.
• If your steering remote controller is not
compatible, learning may not be completed and
an error message may appear.
Registering/Changing the functions
1
Display the <System> setting screen.
On the <TOP MENU> screen:
60
2
Display the <Steering Remote Control
Setting> screen.
• Press [K] repeatedly to change the page on
the <System> menu screen.
3
Press a steering remote controller button
to register/change.
4
Select a function to assign.
• You can change the page to display more
items by pressing [J]/[K].
5
Repeat steps 3 and 4 as necessary.
6
Finish the procedure.
• The unit can register/change all of the button's
functions at the same time. To do this, press each
button in turn and after pressing all of them,
press [Done] in the <Steering Remote Control
Setting> screen. However, new functions cannot
be learned after this operation.
• When changing the functions already learned,
touch the button you want to change in step 3
and then touch to select the new function from
the function list.
• Confirm the contents of the settable functions in
the function list. You cannot edit the function list.
Initializing the settings
1
Display the <System> setting screen. (See
the far left column.)
• Press [K] repeatedly to change the page on
the <System> menu screen.
2
3
• To cancel the initialization, press [No].