X7 250ie
- Heat the bearing seat on the side the brake disc
with the heat gun.
2 - Insert the two bearings one at a time using the
punch consisting of adaptor handle, 32x35 mm
adaptor and 15 mm guide, and take it to the stop.
Specific tooling
020376Y Adaptor handle
020357Y 32 x 35 mm adaptor
020412Y 15 mm guide
Refitting the front wheel
- Carry out the operations described in the «re-
moval» section but in reverse order.
Locking torques (N*m)
Wheel axle nut 45 ÷ 50 Wheel axle clamp
screws 6 - 7 Nm
Handlebar
Suspensions
SUSP - 5