Configuring A Lan; Changing Ip Data Of The Bizip Ad 20 - Siemens HiPath BizIP AD 20 Administration Manual

Configuring a LAN

Only make changes here if you want to adapt your HiPath BizIP to particu-
lar requirements (e.g. integration in an existing

Changing IP data of the BizIP AD 20

You can change the IP address and subnet mask for the BizIP AD 20.
Only make changes here if the use of the standard values would re-
sult in conflict with other network components.
Administration on the PC
Web > Connectivity Settings > LAN > Internal Router IP Addresses
Changing IP data
• Under Primary IP Address, enter the IP address for the BizIP AD 20
(default: 192.168.1.1).
• Under Subnet Mask, enter the subnet mask for the BizIP AD 20 (de-
fault: 255.255.255.0).
Click Apply to apply your changes.
The IP data must correspond to the entries for the active DHCP service in
BizIP AD 20 Page 48.
Configuring a LAN
LAN).
47