Verizon Delphi Connect 4G LTE ACT233L User Manual page 582

pamphlet.
63. Why do the lights on the module change color while I drive?
The module status LED indicates data transmission which is fully explained in the installation
pamphlet and the User Manual.
64. Why does my module only show a blue light?
If you have not performed the vehicle setup steps described in the installation pamphlet or the
User Manual with the ignition on, this must be completed first. If you have completed those
steps and you still have a solid blue LED, your vehicle may currently be incompatible. Check the
Fitment Guide at delphiconnect.com/fitment.
65. I have unplugged the unit from my vehicle and plugged it back in, what do I need to do?
If the LED is solid blue, then begin with step Initiate Module Setup in the installation pamphlet
to re-initialize your module. If the LED is not solid blue, disconnect the unit from your vehicle,
wait 10 seconds, reconnect it and wait for the solid blue LED (about 25 seconds), begin with
step Initiate Module Setup in the installation pamphlet to re-initialize your module.
66. My battery was disconnected recently and I can't connect to my vehicle, what should I do?
If the LED is solid blue, begin with step Initiate Module Setup in the installation pamphlet to
re-initialize your module. If the LED is not solid blue, disconnect the unit from your vehicle, wait
10 seconds, reconnect it and wait for the solid blue LED (about 30 seconds), begin with step
Initiate Module Setup in the installation pamphlet to re-initialize your module.
67. The LED shows solid blue, what should I do?
Begin with step Initiate Module Setup in the installation pamphlet to re-initialize your module.
If the LED returns to solid blue, your vehicle may be incompatible. Check the Fitment Guide at
delphiconnect.com/fitment.
68. Why isn't my car listed as a compatible car? Will it ever be?
Either support for your vehicle has not been confirmed or there is a known incompatibility.
582