Toa SM-68 Instruction Manual

TOA PROFESSIONAL SOUND SPEAKER SYSTEM

General Description

The SM-68 is a full-range, small monitor speaker system
with power handling of 210 watts (continuous program
material) and an input impedance of 8 ohms, as well as with
a variable attenuator. Its sealed box enclosure houses two
full-range cone speakers (5-inch, 12cm) with high efficiency
and durability. The enclosure is made of cast aluminum, so
that it can withstand the roughest use. With an accessory
bracket, the SM-68 is mountable on microphone stands
(Fig. 1), microphone stand shafts (1.10" MAX) (Fig. 2),
plates (Fig. 3) and walls (Fig. 4).
Fig. 1 Fig. 2
ANGLE
ADJUSTER
TOA ELECTRIC CO., LTD.
KOBE, JAPAN
Fig. 3
HEIGHT
ADJUSTER
Plate
*1 When carrying out the installation of
Fig. 4 first take off the bracket No.2
and install the bracket No.1 on the
wall with the wooden screws.
How to Connect
In case of using In case of using two SM-68's in parallel
one SM-68
from
power
Amp.
from
power Amp.
Tip = Hot (+)
Sleeve = Com. ( – )
Imp. = 8 ohms
Fig. 4
Bracket No. 1
*1
Mounting holes
to the wall
*2 Bracket No .2 will change in position
by 90 degrees when these mounting
holes are used.
Instruction Manual
model SM-68
Tip = Hot (+)
Sleeve = Com. ( – )
Total Imp. = 4 ohms
Bracket No. 2
*2
Microphone stand shaft
(1.10" M A X )