Group Scan (Gs) Mode - Uniden UH8060S Owner's Manual

Operation

Group Scan (GS) Mode

GS Mode has CH09 to CH20 in the SCAN
Memory by default. Channels must be stored
to the GS SCAN Memory before group scan
can start.To add/remove channels from GS
SCAN Memory, refer to p.24.
Includes the accessory feature Priority Watch
which allows you to monitor the Instant
Priority Channel while scanning
(see p.15 for setting Instant Priority
Channel and p.24 to turn on Priority
Watch).
GS Scanning checks the Instant Priority Channel for activity regularly
when Priority Watch is ON.
If the Priority Channel becomes active the radio will stay on that channel
for as long as the signal is present. If the received signal ceases, Priority
Scanning continues after 3 seconds.
If scanning stops on a channel which is not a Priority Channel, UHF
CB Radio will continue monitoring the Priority Channel for activity while
listening to the active one.
To deactivate SCAN, press [SCAN].
If a button is not pressed within 10 seconds the UHF CB
Radio will automatically exit the Menu Mode.
NOTE
UNIDEN UH8060S
23 UHF CB Transceiver