Operation; Turning On The Power - Uniden UH8060S Owner's Manual

Operation

Turning on the Power

Press and hold the [POWER] button.
Low-Voltage/High-Voltage Alert
If the power supply voltage exceeds 18VDC, an alert tone
sounds and HI DC flashes for 5 seconds. The power source
must not exceed 25VDC otherwise permanent damage
may occur to your radio, which may not be covered by the
manufacturer's warranty.
NOTE
If the input voltage falls below 10VDC, LO DC flashes for 5
seconds. The power turns off automatically if voltage falls
below 8.5VDC.
Switch your UH8060S OFF and disconnect it from the power
source, before locating the cause of the power supply problem.
UNIDEN UH8060S
12
UHF CB Transceiver