Miele G 7856 Operating And Installation Instructions page 32

Programming special functions
Setting the dosage
Set the dispensing amount according
to the detergent manufacturer's
recommendations and the
applications.
The machine needs 1.85 gal (7 liters) of
water in the program cycle "Main wash".
Example:
The detergent manufacturer
recommends 4 ml of detergent per liter
water.
7 l x 4 ml/l = 28 ml.
2 ml per 1 sec dispensing time;
i.e. programming to 14 secs.
^ Turn the program selector to "Normal"
the dispensing time in seconds is
displayed, e.g "10".
^ Press and hold "Display" until "14" is
displayed (dispensing time 14 secs
per 28 ml, see example above).
The dosage time / dosage amount is
set.
32
Having changed a value or all values:
^ Press the "Start" button. "SP" is
displayed.
^ Press the "Start" button again. The
change has been saved.
Value set:
If the dispensing system was also
vented:
^ Start the "Rinse" program, so that
after venting any agents in the wash
cabinet are diluted before being
drained away.