Hardware Overview - D-Link DNR-202L User Manual

Section 1 - Product Overview
Right View
1
1 Power Receptor
2 Ethernet Port
3 USB Port for HDD 1
4 HDD 1 Button
5 USB Port for HDD 2
6 HDD 2 Button
7 Auto Scan Button
8 Reset Button
D-Link DNR-202L User Manual

Hardware Overview

3
2
Connect the provided power adapter
Connect one end of the provided network cable
Attach an external USB Hard Disk Drive (HDD) to this port to save recorded
streams
Press this button to release the HDD attached to the USB Port for HDD 1
Attach an external USB HDD to this port to save recorded streams
Press this button to release the HDD attached to the USB Port for HDD 2
Press this button to automatically scan for cameras on the network
Press and hold the recessed button for 10 seconds to reset the device to factory
default settings
Rear View
4 6
5
8
7
7