Section 5 - Configuration
Maintenance
Display and Language
Language:
Choose a language for the system menus.
Device Name:
Enter the name of the NVR.
Auto Scan Interval:
Enter a time for auto-scanning of IP cameras in your network.
Enable Camera OSD:
Tick to show the OSD on the stream.
Camera Name:
Tick to show the camera name on the OSD.
Camera Number:
Tick to show the camera number on the OSD.
Date:
Tick to show the date on the OSD.
Time:
Tick to show the time on the OSD.
Bit Rate:
Tick to show the bit rate on the OSD.
Frame Rate:
Tick to show the frame rate on the OSD.
Size:
Select from the drop-down the size of the OSD information.
Color:
Select the color of the OSD information.
D-Link DNR-202L User Manual
52