Section 5 - Configuration
This section will allow you to configure and modify the audio and video parameters for each camera.
Step 1: Select the camera which you would like to modify from the camera list.
Step 2: NVR will display the parameters for the selected camera. You can modify
the parameters for a main and sub profile on this page.
Camera Name:
The name of the camera.
Video Format:
Select the video format the camera supports.
Frame rate:
Select the frame rate.
Resolution:
Select the resolution.
Bit rate:
Select the bit rate.
Quality:
Select the image quality.
Audio:
Check the Enable Audio option for live view and recording
Go to Web:
Click to connect to the web page of the selected network camera
for advanced setup. For example, motion detection should be
configured via the camera web interface to enable the NVR to receive
the trigger message.
Step 3: Click the Save Settings button.
Note: The system will adjust the frame rate automatically based on the maximum frame rate
which that camera can support.
D-Link DNR-202L User Manual
Audio and Video
47