Configuring The Scanner; 123Scan2; Parameter Bar Codes And Config.ini; Updating Scanner Firmware - Symbol CS4070 Product Reference Manual

Table of Contents

Advertisement

1 - 8
CS4070 Scanner Product Reference Guide

Configuring the Scanner

123Scan2

To configure the scanner via 123Scan2, use this utility to generate a 2D bar code with the desired configuration
options. Scan the bar code to configure the scanner with these options. Note that the CS4070 does not support
1D configuration bar codes. See

Parameter Bar Codes and Config.ini

To configure the scanner:
Scan the parameter bar codes in
1.
scanner operation.
For additional customization, edit the
2.
Configuration File on page
When deploying the new configuration to multiple scanners, to ensure unique CS4070 serial numbers
3.
appear in the host's discovery window, edit the
blank ("BTName=") to ensure that each scanner uses the default BT name of
Staging Multiple Scanners
After creating a
config.ini
this scanner and copy it to other scanners via USB connection. Set the time and date on the "cloned" scanners
by scanning bar codes from
NOTE When deploying the new configuration to multiple scanners, to ensure unique CS4070 serial numbers
appear in the host's discovery window, edit the Config.ini file to either remove the BTName entry or set it
to blank ("BTName=") to ensure that each scanner uses the default BT name of CS4070:<serial number>.

Updating Scanner Firmware

To update scanner firmware:
Connect the micro USB cable from the host to the CS4070.
1.
Copy the .dat and .bin files to the root directory of the scanner.
2.
Disconnect the cable when the host indicates that it is safe to remove.
3.
After several minutes the LED turns green to indicate that the firmware was successfully installed.
Chapter 5,
123Scan2.
Chapter 3, User Preferences
Config.ini
1-9.
file for one "golden" scanner with all desired settings, create a copy of the file from
Set Date and Time on page
and
Chapter 4, Symbologies
file on the scanner using the options in
file to either remove the
Config.ini
3-5.
to customize
Editing the
entry or set it to
BTName
<serial number>.
CS4070:

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents