C - 2
CS4070 Scanner Product Reference Guide
iPad Pairing Example
Press the scan button (+) to wake the scanner.
1.
Scan the
2.
Bluetooth HID Profile
Press and hold the Bluetooth button for five seconds. The scanner beeps and the Bluetooth button blinks
3.
quickly to indicate that the scanner is discoverable by the host.
On the iPad, tap the
4.
Tap
from the list of options that appears.
5.
General
Tap
6.
Bluetooth
indicated by its model name.
Bluetooth Devices
Figure C-1
Select the CS4070 from the list. In HID mode, the CS4070 doesn't have to scan a PIN code to authenticate
7.
pairing.
The scanner beeps to indicate it has paired with the iPad, and the iPad displays Connected next to the
CS4070 device name.
CS4070 Connected
Figure C-2
bar code on
icon.
Settings
. If Bluetooth is not enabled, swipe to enable it. The CS4070 appears in the
page
3-8.
list,
Devices