Laser Device Notices; Laser Safety Warnings; Compliance With Cdrh Regulations; Compliance With International Regulations - HP ProLiant ML150 Operation Manual

Laser Device Notices

All HP systems equipped with a laser device comply with safety standards, including
International Electrotechnical Commission (IEC60825). With specific regard to the laser, the
equipment complies with laser product performance standards set by government agencies as
a Class 1 laser product. The product does not emit hazardous light; the beam is totally
enclosed during all modes of customer operation and maintenance.

Laser Safety Warnings

Compliance with CDRH Regulations

The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug
Administration implemented regulations for laser products on August 2, 1976. These
regulations apply to laser products manufactured from August 1, 1976. Compliance is
mandatory for products marketed in the United States.

Compliance with International Regulations

All HP systems equipped with laser devices comply with appropriate safety standards
including IEC60825.

Laser Product Label

The following label or equivalent is located on the surface of the HP supplied laser device.
HP ProLiant ML150 Server Operations and Maintenance Guide
HP CONFIDENTIAL Codename: Stone Soup Part Number: 343329-001 Last Saved On: 8/14/03 10:40 AM
WARNING: To reduce the risk of exposure to hazardous radiation:
•
Do not try to open the laser device enclosure. There are no user-serviceable
components inside.
•
Do not operate controls, make adjustments, or perform procedures to the laser
device other than those specified herein.
•
Allow only HP authorized service technicians to repair the laser device.
This label indicates that the product is classified as a
CLASS 1 LASER PRODUCT. This label appears on a
laser device installed in your product.
Regulatory Compliance Notices
A-3