LG GoldStream LR3001 System Manual page 83

                                                                 (  && '
  3" %4
 T( !     N  O  "",S
LR3216_B#
LR3216_B# setup
Starting system configuration setting
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[1] Configure Ethernet 1 Port ? [Yes]
Configure IP for ethernet 1 port ? [Yes]
Enter IP address for ethernet 1 port [0.0.0.0] 150.150.62.244
Enter netmask for ethernet 1 port [0.0.0.0] 255.255.255.128
Configure RIP ? [No] y
Set RIP global parameters
Update Interval ? [30]
Ageing timeout value ? [180]
Set RIP port parameters
Send type (1=RIP1, 2=RIP2, 3=RIP1compatible, 4=Don't send) [1]
Receive type (1=RIP1, 2=RIP2, 3=RIP1orRIP2, 4=Don't receive) [3]
Configure OSPF ? [No]
[2] Configure Ethernet 2 Port ? [No]
[3] Configure WAN 1 Port ? [Yes]
Select WAN Protocol (1.PPP, 2.Frame Relay) [1]
Configure IP for WAN 1 Port ? [Yes]
Enter IP address for WAN 1 [0.0.0.0] 100.1.1.200
Enter netmask for WAN 1 [0.0.0.0] 255.255.0.0
Enter Keepalive Time [3]
Configure PPP Authentication Protocol ? [No]
Set RIP port parameters
Send type (1=RIP1, 2=RIP2, 3=RIP1compatible, 4=Don't send) [1]
Receive type (1=RIP1, 2=RIP2, 3=RIP1orRIP2, 4=Don't receive) [3]
Configure OSPF ? [No]
Configure Backup ? [No]
[4] Configure WAN 2 Port ? [No]
[5] Configure SNMP [No] ? y
Enter System Descriptor [LR3216] : LR3216_B
Enter System Contact [Nothing] :
Enter System Name [TEST Router] :
Enter System Location [7209] :
Add Manager [Yes] ?
Enter Manager IP address [0.0.0.0] 150.150.60.130
Community Name [public]
Access Right (1=READ Only, 2=WRITE Only, 3=READ/WRITE) [1]
Send TRAP to this manager [Yes]
Add Manager [Yes] ? n
[6] Change Prompt ? [No]
#%