LG GoldStream LR3001 System Manual page 31

                                                                    
& ' (
arp : Address Resolution Protocol
clear : Clear statistics or system logs saved
default : Set system to FACTORY DEFAULT configurations
download(conf) : Download software (configuration file)
disable : Disables a port and/or a protocol
duplicate : Configure the duplicate IP for the ethernet port
enable : Enables a port and/or a protocol
erasenvram : Erase the system configuration
exit,logout : logout and exit system
history,h : Display later commands. (max commands can be saved)
ifconfig
port
more : Change the number of lines in each full screen
ipx : IPX Route
ping : ping test
reboot : Reboot system
restart
: Restart system with new configurations set by telnet
route : Adds or deletes static route
save : Save current configurations
set : Set parameters
setup, install : Setup basic parameters
show : Display information
su : Switch user
upload(conf) : Upload software (configuration file)
For information about a specific command, type "help {command}"
Example :
help set
LR3012#
: Change interface IP address and subnetmask for a
#