Advertisement
&
' (
Configure Backup ? [No] y
Backup Delay(>0) ? [0]
[4] Configure Backup V35 Port? Y
Select WAN Protocol (1.PPP) [1]
Configure IP for Backup Port ? [Yes]
Enter IP address for Backup Port []
Enter netmask for Backup Port []
Enter Keepalive Time [3]
Configure PPP Authentication Protocol ? [No] y
PPP Authentication Protocol (1.CHAP, 2.PAP) [1]
Authentication Type
(1.Sent-Only(Server), 2.Recv-Only(Client), 3.Sent-Recv) [2]
Enter Username []
Enter Password []
Set RIP port parameters
Send type (1=RIP1, 2=RIP2, 3=RIP1compatible, 4=Don't send) [2]
Receive type (1=RIP1, 2=RIP2, 3=RIP1orRIP2, 4=Don't receive) [3]
Configure OSPF ? [No] y
OSPF Area ID ? [0.0.0.0]
Hello Interval ? [10]
Dead Interval ? [40]
Cost ? [1]
Type ? (1=PtP, 2=BROADCAST, 3=NBMA, 4=PtMP) [2]
Configure PSTN ? [No] y
Enter Dialing Type(1.Dial Out,2.Wait Ring, 3.Dedicated Line) [1]
Enter Remote Phone Number [7210]
Enter Serial Speed (1200~15200) [19200]
Enter Retry Count [6]
Enable Redial Interval Timeout ? [30]
Enter Dialing Timeout [30]
"
Advertisement
