LG GoldStream LR3001 System Manual page 38

     
Enter Keepalive Time [3]
Configure PPP Authentication Protocol ? [No]
Configure RIP ? [No]
Configure OSPF ? [No]
Configure Backup ? [No] y
Backup Delay(>0) ? [0] 0
[4] Configure Backup V35 Port? y
Select WAN Protocol (1.PPP) [1]
Configure IP for Backup Port ? [Yes]
Enter IP address for Backup Port []
Enter netmask for Backup Port []
Enter Keepalive Time [3]
Configure PPP Authentication Protocol ? [No] y
PPP Authentication Protocol (1.CHAP, 2.PAP) [1]
Authentication Type
(1.Sent-Only(Server), 2.Recv-Only(Client), 3.Sent-Recv) [2]
Enter Username []
Enter Password []
Set RIP port parameters
Send type (1=RIP1, 2=RIP2, 3=RIP1compatible, 4=Don't send) [2]
Receive type (1=RIP1, 2=RIP2, 3=RIP1orRIP2, 4=Don't receive) [3]
Configure OSPF ? [No] y
OSPF Area ID ? [0.0.0.0]
Hello Interval ? [10]
Dead Interval ? [40]
Cost ? [1]
Type ? (1=PtP, 2=BROADCAST, 3=NBMA, 4=PtMP) [2]
Configure ISDN ? [No] y
Enter Dialing Type(1.Dial Out,2.Wait Ring, 3.Dedicated Line) [1]
Enter Remote Phone Number [7210]
Enter Modem Speed (9600~33600) [14400]
Enter Retry Count [6]
Enter Retry Sleep Timeout [1]
Enter Dialing Timeout [30]
Enable System Console ? [No]

5 $ "
5  - " !" 9:.- #7
08     "",S
[3] Configure WAN 1 Port ? [Yes] or [4] Configure WAN 2 Port ? [Yes]
Select WAN Protocol (1.PPP, 2.Frame Relay, 3.HDLC) [1]
Configure IP for WAN 1 Port ? [Yes]
Enter IP address for WAN 1 [150.150.100.2]
Enter netmask for WAN 1 [255.255.255.0]
Enter Keepalive Time [3]
Configure PPP Authentication Protocol ? [No]
Configure RIP ? [No]
Configure OSPF ? [No]
!