Rear Wheel Removal
1. Place the motorcycle on its center stand.
2. Loosen the drive chain adjustng nut
lock nuts (1) and adjusting nuts (2).
3. Remove the rear axle nut.
4. Remove the drive chain (3) from the
driven sprocket by pushing the rear
wheel forward.
Lock nuts
(4) Axle shaft
Adjusting nuts
Drive chain
5.Remove the axle shaft (4 ), side c
and rear wheel from the swing arm.
NOTE:
* Do not depress the brake pedal wh
the wheel is off the motorcycle. T
caliper pistons will be forced out of
cylinders with subsequent loss of bra
fluid. If this occurs, servicing of t
brake system will be necessary.
your authorized Honda dealer for
service.
(1)
(2)
(3)
72
h
l o
aen
frhe
ttrl
I
GAI
t Y
c
b
d
Ani
ffit
r\ra
hral
i.et