Drive Chain Adjustment - Honda CB750F2 Owner's Manual

Adjustment:
Drive chain slack should be checked and
adjusted, if necessary, every 1,000 km (600
miles). When operated at sustained high
speeds or under conditions of frequent
rapid acceleration, the chain may require
more frequent adjustment.
If the drive chain requires adjustment, t
procedure is as follows:
l. Place the motorcycle on its center
with the transmission in neutral and t
ignition switch off .
2. Loosen the axle nut (1).
3. Loosen the lock nuts (2) on both rig
and left swingarm.
4.Turn both adjusting nuts (3) an equ
number of turns until the correct dri
chain slack is obtained. Turn t
adjusting nuts clockwise to tighten
chain, or counterclockwise to provi
more slack. Adjust the chain slack at
p o i n t m i d w a y b e t w e e n t h e d r i
sprocket and the rear wheel sprock
Rotate the rear wheel and
slack at other sections of the chain.
Chain slack should be:
3 0 - 4 0 m m ( 1 . 2 - 1 . 6 i n )
(2)
Axle nut
Lock nut
Adjusting nut
(4) Index mark
(5) Rear edse of
adjusting slot
(5)
(1)
(2)
(3)
62