Setting The Presentation Timer - BenQ ES500 User Manual

Setting the presentation timer

The presentation timer can indicate the
presentation time on the screen to help you
achieve better time management when giving
presentations. Follow these steps to utilize this
function:
1. Press Timer Set up on the remote control
or go to the SYSTEM SETUP: Basic >
Presentation Timer menu and press
Mode/Enter to display the Presentation
Timer page.
2. Highlight Timer Period and decide the
timer period by pressing
minutes in 1-minute increments and 5 to 240 minutes in 5-minute increments.
3. Press
up on the screen by press
Selection
Always
3 min/2 min/1
min
Never
4. Press
/
.
Top-Left
5. Press
counting direction by pressing
Selection
Count Up
Count Down
6. To activate the presentation timer, press
press Mode/Enter.
7. A confirmation message displays. Highlight Yes and press Mode/Enter to
confirm.
Operation
36
/
to highlight Timer Display and choose if you want the timer to show
ing
Description
Displays the timer on screen throughout the presentation time.
Displays the timer on screen in the last 3/2/1 minute(s).
Hides the timer throughout the presentation time.
to highlight Timer Position and set the timer position by pressing
Bottom-Left
to highlight Timer Counting Direction and select your desired
Description
Increases from 0 to the preset time.
Decrease from the preset time to 0.
. The length of time can be set from 1 to 5
/
.
Top-Right Bottom-Right
/
.
and press / to select On and