Table of Contents
Advertisement
Interactive Setup
Label the Channels
The next step lets you make your channel list and label your
channels. (For more, see List and Labels in the Quick Reference
section.)
SETUP
Would you like to name each
channel?
1 Name channels
2 Skip this step
1. Press MENU to bring up the List and Labels control panel.
LIST AND LABELS
Chan
Normal
#
List
59
Yes
Use ^ or v, keypad, or
CHAN ^/v to set channel,
MENU to exit.
2. Use the left and right arrows to point to the three different
areas of the control panel (called "fields").
3. Use the up and down arrows to scroll through the numbers
and letters and select Yes or No in the Normal List field. You
may wish to refer to the call letters listed in your newspaper's
TV section for ideas on labelling the channels.
4. Repeat this process for each of your channels. Then press
MENU to continue.
Chan
Label
-------
Use the CH ^ (channel up) or CH v
(channel down) buttons to change
channels in the Chan # field. This
works even if you're not in the Chan
# field. Or, enter the channel number
directly using the number buttons on
the universal remote. To enter a
number greater than 99, press and
hold "1" to enter the hundreds digit,
then press the two remaining
numbers.
The list and labels feature can also be
accessed from the Channel menu.
Because this procedure can be time
consuming, feel free to skip this step
and come back to it later.
22
Advertisement
Table of Contents
