Fcc Information - Radio Shack HTX-10 Owner's Manual

MANUAL CONVENTIONS
Your transceiver's buttons perform multiple functions. The abbre-
viation or symbol for a function is printed on, below, or above
each button.
To activate certain transceiver features, you must press
(function) then another button.
FUNC
Button names are printed in this manual in small, bold, capital let-
ters (such as
PUSH FUNC
bers that appear on the display are printed using a distinctive
typeface (such as 28.300

FCC INFORMATION

This device complies with Part 15 of the FCC Rules . Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause un-
desired operation.
This equipment complies with the limits for a Class B digital de-
vice as specified in Part 15 of FCC Rules . These limits provide
reasonable protection against radio and TV interference in a res-
idential area. However, your equipment might cause TV or radio
interference even when it is operating properly. To eliminate in-
terference, you can try one or more of the following corrective
measures:
• reorient or relocate the receiving antenna
• increase the distance between the equipment and the radio
or TV
Consult your local RadioShack store if the problem still exists.
You must use shielded interface cables with this equipment.
4
or ). Words, symbols, and num-
SCAN
or
BUSY ).
PUSH