Using Shift; Using T-Low (Tone-Low) - Radio Shack HTX-10 Owner's Manual

19-1110.fm Page 24 Friday, March 24, 2000 9:42 AM

Using SHIFT

The transceiver's shift function lets you set the transmit frequency
shift from the receive frequency in either direction within the
range of 0.0 Hz to 990 kHz.
Follow these steps to set the frequency shift direction and offset
frequency.
1. To set the frequency shift direction to
then press while
SHIFT
Press and
PUSH FUNC
set the frequency shift direction to
2. Press
PUSH FUNC
appears.
3. Rotate to set the offset frequency to any frequency
TUNE
from 0 to 990 kHz.
4. To exit, hold down
PUSH FUNC
3 seconds.

Using T-LOW (Tone-Low)

Press then
PUSH FUNC T-LOW
appears when the high-cut filter is on.
LOW
24
, p ress
+
FUNC appears. +SHIFT
again while FUNC
SHIFT
.
- -SHIFT
then for about 3 seconds.
SHIFT
and together for about
SHIFT
to turn the high-cut filter on or off.
PUSH FUNC
appears.
appears to
appears .
000