Notes On Ssb Reception - Radio Shack HTX-10 Owner's Manual

19-1110.fm Page 19 Friday, March 24, 2000 9:42 AM
3. To transmit, hold down the push-to-talk button on the micro-
phone, hold the microphone 2–3 inches from your mouth,
and speak in a normal tone of voice.
a bar graph which shows the strength of your transmission.
4. When you finish transmitting, release the PTT button.
and the signal strength bars disappear.
5. To turn off the transceiver, rotate
wise until it clicks.

NOTES ON SSB RECEPTION

• If the voice sounds distorted, slowly rotate
signal into its natural voice tonal range.
• An SSB signal produces a fluttering, unintelligible sound
when received in the AM mode. Set the mode switch to
either LSB or USB, and adjust
intelligible, it might be an SSB signal operating on the other
sideband — try the other SSB mode.
TX appears along with
counterclock-
OFF/VOLUME
to bring the
FINE
. If the voice is still not
FINE
TX
19