Variable Speed - Craftsman 320.38596 Operator's Manual

LOCK SWITCH (Fig, 3)
To lock the paddle switch, slide
the lock switch to the locked
position. To unlock the paddle
switch, slide the lock switch to the
unlocked O position. The paddle
switch will not work when the lock
switch is in the locked position.
,_, WARNING: Always lock the
paddle switch or remove the
battery pack before performing
maintenance, changing
accessories, storing the tool and
any time the tool is not in use.
PADDLE SWITCH (Fig. 4}
1. Set the lock switch to the
unlocked position.
2. To turn the auto ratchet ON,
depress the paddle switch.
3. To turn it OFF, release
the switch.
LED WORKLIGHT (Fig. 5)
The LED worklight, located below
the auto ratchet head, will turn
on when the paddle switch is
depressed. The LED worklight
will turn off when the switch is
released. This provides additional
lighting on the surface of the
workpiece for operation in lower-
light areas.
VARIABLE SPEED
The variable speed paddle
switch delivers higher speed with
increased paddle switch pressure
and lower speed with decreased
switch pressure.
Fig. 3
Lock switch
®
®
Unlock
lock
Fig. 4 . -_,
Fig. 5
LED worklight
12