Internet Access Using The Wizard - ZyXEL Communications Prestige 623R-A1 Quick Start Manual

Internet Access Using the Wizard

You can use the Wizard Setup screens to configure your system for Internet access settings and fill in the
fields with the information in the Internet Account Information table.
Step 1. In the Site Map screen click Wizard Setup to display the first wizard screen.
Wizard Screen 1
Step 2. The second wizard screen varies depending on what protocol (or encapsulation) type you use.
Wizard Screen 2: Internet Connection with PPPoE
Prestige 623R-A1 ADSL Dual-link Router
Select an encapsulation type your ISP uses from
the Protocol drop-down list box.
Enter the VPI and VCI numbers assigned by your
ISP in the VPI and VCI fields.
Refer to the on-line HTML help or the User's
Guide to set the ATM QoS Type and Cell Rate
fields.
Click Next.
If your ISP provides the name of your PPPoE
service provider, enter it in the Service Name field.
Enter the user name and password exactly as
your ISP assigned them.
Select Obtain an IP Address Automatically if you
have a dynamic IP address; otherwise select Static
IP Address and type your ISP assigned IP address
in the text box below.
Select Connect on Demand when you don't
want the connection up all the time and
specify an idle time-out period (in seconds) in
the Max. Idle Timeout field.
Select Nailed-Up Connection when you want your
connection up all the time. The Prestige will try to
bring up the connection automatically if it is
disconnected.
13