Start The Software - Panasonic WJ-ND200 Operating Instructions Manual

Start the Software

Screenshot 1
Start just after the PC is started up.
Screenshot 2
The login window will be displayed.
Screenshot 3
The top page of the operation window will be displayed.
8
Step 1
Select "WJ-ND200 Administrator Console" from the
"Start" menu ("Start" - "All Programs" - "Panasonic" -
"WJ-ND200" - WJ-ND200 Administrator Console") or
double click the shortcut icon of "WJ-ND200
Administrator Console" on the desktop.
The software will start up.
Important:
Log in to the PC as an administrator before starting
the software.
Step 2
Enter the password.
The default password is "12345".
Refer to page 21 for how to change the password.
Step 3
Click the [OK] button.
Step 4
Perform the settings for each item.
Step 5
Click the [SET] button after completing the settings.
Step 6
Close the window by clicking the
right of the window to exit the software.
button at the top