Step
Screw (quantity)
2
M2 × 3 mm, flat-head, nylon-coated (4)
1150 Thermal fan assembly
For access, remove these FRUs in order:
•
"1010 Battery pack" on page 62
•
"1020 Bottom door" on page 63
•
"1030 Optical drive" on page 64
•
"1040 Hard disk drive or solid-state drive assembly" on page 66
•
"1050 Keyboard" on page 67
•
"1100 Keyboard bezel" on page 80
Attention:
• Do not handle the thermal fan assembly roughly. Improper handling of the thermal fan assembly can
cause distortion or deformation and imperfect contact with components.
• Do not touch or apply any excessive force to the fan motor. It might cause damage to the thermal fan
assembly or might cause the computer to malfunction.
Removal steps of thermal fan assembly
Detach the thermal fan assembly connector
as illustrated, but do not remove them.
Note: Some models might not have screws
1
. Loosen the screws
1
2f
2e
2c
2e
and
2f
Color
Black
2
in ascending alphabetical order
2b
2d
2a
.
.
Chapter 9
Torque
0.392 Nm
(4.00 kgf-cm)
Removing or replacing a FRU
89